WFHZ-4500 Mid-range configuration four-head seamless welding machine
□ The door and window welding is flatter, the welding strength is higher, the crack is not cracked after welding (guaranteed), and add more features.
□ The pressure clamp has a heating tube, and the welding strength reaches the national standard after preheating. It overcomes the shortcomings of the low welding strength of the PVC seamless welding machine for ten years, and solves the problem that the welding of PVC door and window is not strong when the ambient temperature is low.
□ The welding is flatter – the pressure clamp moves back and forth into a square rail linear bearing instead of the sleeve sliding. Due to the small gap between the linear bearings, the welding cross, the middle cymbal, the frame and the fan are flatter, and the doors and windows are more beautiful.
□ Auxiliary compression – original design. The pressure of the main pressure clamp is lowered, the pressure in the welded joint area is reduced, and the deformation of the profile is reduced. For the soft white profile, the welding surface is ensured to be flat.
□ Mullion positioning—original design, the positioning cylinder movement is consistent with the lower positioning. It is not necessary to draw the line and the angle when welding, ensuring dimensional accuracy and improving efficiency.
□ Telescopic pallets – adapt to different sizes of doors and windows, no need to disassemble, reduce handling obstacles.
□ The “Mullion/Border” welding method is converted by pneumatic means to improve work efficiency.
□ With seam/seamless conversion to meet different welding requirements.
Power supply: 220V 50Hz
Input power: 4.0Kw
Air pressure: 0.5～0.8MPa
Air consumption: 200L/min
Welding profile height: 20-150mm
Welding profile width: 110mm
Maximum welding size: 4500mm
Overall dimension: 5000*1100*1750mm